Click for more info and reviews of this JR Products RV Sinks: Check out some similar RV Sinks options:
Don’t forget to subscribe!
Full transcript:
Michael: Hi there. I'm Michael with eTrailer.com.Today, we're going to take a quick look at the molded lavatory sink for your RV restroom. This is going to replace one worn out or damaged lavatory sink. It is made of a lightweight plastic, like most of your lavatory sinks are, so it doesn't add any weight onto your RV and affect your gas mileages or anything like that.The most important thing for a sink is going to be the dimensions, so let me give those to you real fast. So overall width, the outside to the outside, we're going to be right about 14 and seven-eighths of an inch wide. Our depth or the amount that it's going to stick out into the room is going to be right about 12 and three-eighths of an inch.
And then our height, once we have it installed, you can see that there's a little bit of a lip there just to get it installed. We won't count that. So we're looking at right about six inches tall.The cutout that you're going to need to get this installed is going to be 14 and a quarter of an inch wide and 11 and a half inches deep. This kit does come with the six-inch long tail flange as well as the four-inch-long rubber sink stopper, the mounting clips and screws to get this installed, and keep in mind, this is the white option, so if white matches your color scheme in your RV, that might be a good option for you. They also make another one that is parchment colored.
It's the exact same dimensions, same everything. Essentially, just the parchment color rather than the white. You can see parchment. It's kind of a light tan color.So if that works better for your setup, your color scheme, they're basically the exact same sink, just pick the one that works best for you. That's going to complete our look at the molded lavatory sink.
Thanks for watching.
0 Comments