First... sorry my English pronunciation... not the best. This is not a one day modification, you may need 2 or 3 days to make the holes on the copper plate.
It uses a TEC 112710 Module, a 4500 RPM 80mm Fan with shock absorbers , a CPU Pccooler S83, a copper fixation plate, stainless steel M4 screws, washers and bolts from the Heat sink to the copper plate, Nylon M4 screws, washers and bolts from the camera to the copper plate.
This modification gets a Delta temperature change of 20.3 degrees Celsius at 15 min from start.
Temperature checked with ASICAP sensor's temperature software.
Darks changes in a very positive way from 30.2 to a 9.9 degrees Celsius on sensor's temperature.
It is possible to get higher Delta temperature change with a larger fan/ heatsink, the problem here is weigth.
All items can be found at amazon.
Thanks to my friend Roberto Zavala Gutierrez ( XE1S ) for cut and drill the copper plate.
CS
Luis Gtz Mexico city.
0 Comments